Diamond
For residential and light commercial wall projects, Anchor Diamond blocks feature patented rear-lip technology for a uniform setback and quick installation. Easy-to-install Anchor Diamond blocks are available in straight or bevelled faced styles in a variety of natural colours. Optional accessories offer even more design versatility.

The classic Anchor Diamond block is the contractor's choice for wall construction. The integral rear lip speeds installation, eliminates guesswork and reduces labour costs with a quick, uniform setback. You can build gravity walls up to 1.2m high (4 feet) or, with geosynthetic reinforcement and professional design, Anchor Diamond walls can reach heights in excess of 10m (30 feet).

COLOURS AND SPECIFICATION

SPECIFICATION

STRAIGHT FACE


Dimensions* Nominal	150 mm x 435 mm x 300 mm (6'' x 17 1/4'' x 12'')

Approx. Weight*	33 kg (72 lbs.)

Coverage	0.065 m2 (.72 sq. ft.)

Setback	30 mm (1 1/8'')

Batter	10.6º

Minimum Inside Radius	2.4m (8 feet)

Minimum Outside Radius	4 feet (1.2m)

BEVELED FACE


Dimensions* Nominal	150 mm x 400 mm x 300 mm (6'' x 15 7/8'' x 12'')

Approx. Weight*	31 kg (68 lbs.)

Coverage	0.06 m2 (.67 sq. ft.)

Setback	30 mm (1 1/8'')

Batter	10.6º

Minimum Inside Radius	1.2m (4 feet)

Minimum Outside Radius	600 mm (2 feet)

CAP


Dimensions* Nominal	75 mm x 435 mm x 250 mm (3'' x 17 1/4'' x 10'')

Approx. Weight*	15 kg (32 lbs.)

Coverage	N/A

Setback	N/A

Batter	N/A

CORNER BLOCK


Dimensions* Nominal	150mm x 200mm x 300mm (6'' x 8'' x 12'')

Approx. Weight	14.5 kg (31 lbs.)

Coverage	N/A

Setback	N/A

Batter	11º

* Nominal Dimensions. Actual dimensions and weight may vary from these nominal dimensions due to variations resulting from the manufacturing and splitting process. Specifications may change without notice. See your Anchor representative for details, color options,block dimensions and additional information.

Safe lifting and handling procedures should be observed when using any Anchor Wall Systems block.

SYSTEM

Diamond uses the time tested rear lip developed and patented by Anchor Wall Systems. Building a Diamond wall is simple – just place each block on top of the course below and pull the block forward the rear lip engages with the block below.

At elevations where reinforcement is required, simply lay it flat to within 25mm of the front face of the block and carry on laying block as normal. The setback and alignment of the wall are automatically controlled making the process of building a Diamond wall, quick and efficient

MANUFACTURED LOCALLY BY

Acheson & Glover are one of Irelands leading Concrete Brick, Paving and Landscaping product manufacturers.

Tel 029 2076 5872