vertica
Designed for steep, sloping hillsides and other structural problems, Anchor Vertica walls can be built to virtually any height in incredibly tight spaces - thanks to an impressive, built-in alignment locators, and a near vertical rise for less excavation and land loss. Typically used with geosynthetic reinforcement, Anchor Vertica blocks meet or exceed industry standards for strength and durability.

Used in development or where space is at a premium
- Patented locator lug technology gives quick, uniform set back for reduced labour costs
- Straight or bevelled face styles provide more design freedom and versatility title - Warm earth tone colours
- Rugged, rock-like texture

COLOURS AND SPECIFICATION

SPECIFICATION

STRAIGHT


Dimensions* Nominal	200 mm x 450 mm x 280 mm (8'' x 18'' x 11'')

Approx. Weight	39 kg (86 lbs.)

Coverage	.09 m2 (1.0 sq. ft.)

Setback	25 mm (0.5'')

Batter	7º

BEVELLED


Dimensions Nominal	200 mm x 450 mm x 280 mm (8'' x 18'' x 11'')

Approx. Weight	39 kg (86 lbs.)

Coverage	.09 m2 (1.0 sq. ft.)

Setback	25 mm (0.5'')

Batter	7º

CAP


Dimensions* Nominal	100 mm x 450 mm x 250 mm (4'' x 17 1/4'' x 10'')

Approx. Weight	18 kg (40 lbs.)

Coverage	N/A

Setback	N/A

Batter	N/A

CORNER


Dimensions* Nominal	200 mm x 450 mm x 225 mm (8'' x 18'' x 19'')

Approx. Weight	46 kg (101 lbs.)

Coverage	N/A

Setback	N/A

Batter	N/A

* Nominal Dimensions. Actual dimensions and weight may vary from these nominal dimensions due to variations resulting from the manufacturing and splitting process. Specifications may change without notice. See your Anchor representative for details, color options,block dimensions and additional information.

Safe lifting and handling procedures should be observed when using any Anchor Wall Systems block.

SYSTEM

Vertica uses a patented system to create a uniform setback and to locate successive blocks accurately on the preceding courses. On the top of each Vertica block, there is a locating lug. On both sides of each Vertica block, there is a cam.

When a Vertica unit is placed on top of a course of previously laid units, pull the unit forward and the cams on each side of the block each engage with the cam on two adjacent blocks below.

At elevations where reinforcement is required, simply lay it flat to within 25mm of the front face of the block and carry on laying block as normal. Simple, easy and very effective.

MANUFACTURED LOCALLY BY

Acheson & Glover are one of Irelands leading Concrete Brick, Paving and Landscaping product manufacturers.

Tel 029 2076 5872